Frozen foam, lifted clean, timber left intact
Dry ice blasting spray foam removal in Stafford
We handle dry ice blasting spray foam removal in Stafford for homeowners stuck with failed loft and roof insulation. Dry ice pellets at around -78C shatter the foam so it lifts away without gouging rafters or tearing felt, and we vacuum the debris as we go. If a mortgage lender has flagged your spray foam, or your loft has gone damp and heavy, we survey it, clear it and leave the roof space ready for proper insulation.
Live phone supportUpfront optionsBacked workmanship
What's included
What our spray foam removal service includes
Every dry ice blasting job we quote in Stafford includes the survey, the removal, the clean-up and the paperwork. What varies is the size of the area and the type of foam, and we set that out clearly before you commit.
Full site survey
We measure the affected area, identify open cell or closed cell foam, and check access. You get a fixed written price the same day, usually within two hours of the visit, with no obligation to book.
Dry ice blasting removal
The core of the job: dry ice pellets fired from a blasting machine to freeze and fracture the foam, bay by bay, with the nozzle kept low so the timber underneath is not cut or gouged.
Vacuum and hand finish
All loose foam goes into a spray foam removal vacuum, and we finish edges and corners with an oscillating multi-tool and industrial scraper. Rafters, purlins and wall plates are wiped down before we leave.
Moisture and thermal check
We run a moisture meter and thermal imaging camera across the cleared space and show you the readings. If we find damp or early timber staining, you see it and we tell you what it means for the roof.
Before-and-after record
We photograph each bay before and after removal and issue a written record of the method used. That package is what lenders, solicitors and buyers ask to see when foam has been flagged on a survey.
Waste removal and disposal
The removed foam is bagged and taken away for proper disposal. You are not left with skips to arrange or material to shift, and the loft is left clean and ready for replacement insulation.
Service overview
What dry ice blasting spray foam removal in Stafford involves
Dry ice blasting spray foam removal in Stafford uses compressed dry ice pellets fired from a blasting machine to freeze and fracture cured foam. The pellets hit the surface at speed, the foam turns brittle and releases from the timber, and because the ice sublimates there is no water, no chemical residue and no secondary mess to clean out of your loft. We follow the blast with a spray foam removal vacuum, then hand-finish corners and rafter bays with an oscillating multi-tool and industrial scraper.
Most Stafford jobs come from spray foam that was installed between the rafters years ago and has now failed. In a town where a lot of housing stock is older brick and tile, that foam traps moisture against roof timbers, kills loft ventilation and shows up later as hidden damp or roof timber rot. We also get called after a mortgage lender refusal, where the buyer needs the foam gone before the sale completes. That is where dry ice spray foam removal Stafford Staffordshire homeowners rely on earns its keep.
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.
The service timeline
How our spray foam removal process runs
The process flexes to the condition, but these checkpoints keep decisions clear.
Survey and quote
We visit your property, measure the affected area in square metres, and identify whether you have open cell spray foam or closed cell spray foam. Closed cell is denser and takes longer, so it prices differently. You get a fixed written price the same day, usually within two hours of the visit.
Protect the space
Before any blasting starts we lay protective sheeting over floors and any stored items, seal doorways, and set up an air scrubber. Dry ice blasting is clean compared with sand blasting media, but we still contain the work area. Setup takes around 30 minutes on a standard loft.
Blast the foam
Our technician works bay by bay with the dry ice blasting machine, keeping the nozzle angle low so the ice fractures foam without cutting into timber. A typical three-bedroom loft takes four to six hours. We check progress with a moisture meter as we go, because damp patches tell us where foam has been holding water.
Vacuum and finish
Every loose fragment goes into the spray foam removal vacuum, and we finish edges and tight corners with an oscillating multi-tool and industrial scraper. Rafters, purlins and wall plates get wiped down. This stage is where a rushed job shows, so we do not skip it.
Inspect and hand over
We run a final thermal imaging camera check across the roof space, photograph each cleared bay, and walk you through the results. You get the before-and-after images and a written removal record. Most customers have that in hand the same afternoon the work finishes.
Tools & methods
Tools and methods we use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Dry ice blasting machine
Fires dry ice pellets at speed to freeze and fracture cured foam. It is the core tool for every job, and it leaves no water or blasting media behind in the loft.
Spray foam removal vacuum
Captures loose foam fragments and dust as they come off the timber, so the roof space is left clean and nothing is left to settle into new insulation.
Oscillating multi-tool
Finishes edges, corners and rafter bays where the blasting nozzle cannot reach. It lets us take foam off cleanly without cutting into the wood.
Industrial scraper
Hand-finishes stubborn patches and wall plates after blasting. Used sparingly, because the aim is to let the ice do the work, not the blade.
Thermal imaging camera
Shows where damp is sitting in the roof structure before and after removal, so we can prove the space is dry rather than just assume it.
Moisture meter
Takes readings from rafters and wall plates as we work. Damp readings tell us where foam has been holding water and whether timber needs further attention.
Air scrubber
Filters airborne particles during removal, which matters when foam contains isocyanate-cured material. It keeps the working area and the rest of the house clean.
Use cases
When to book dry ice blasting spray foam removal
These examples show how the service framework adapts rather than forcing every call through one repair.
Damp ceiling fixed in Rising Brook
A landlord in Rising Brook had a recurring damp stain on the bedroom ceiling below a foamed loft. Two previous contractors had treated the stain without addressing the foam holding moisture against the roof timbers. → We removed the foam with dry ice blasting, identified the trapped moisture with a thermal imaging camera, and restored the ventilation path. The ceiling dried out and the stain stopped returning.
Roof saved in Wildwood
A homeowner in Wildwood was quoted for a full roof strip and re-tile because of spray foam. The tiles were sound; the foam was the problem, and it had sealed the roof deck so completely that condensation was forming underneath. → We surveyed the roof, confirmed the tiles were fine, and removed the foam with dry ice instead. The timber came out clean, the roof stayed in place, and the customer avoided a five-figure strip.
Problems we solve
Problems our Stafford foam removal solves
Failed spray foam rarely announces itself. It shows up in a survey, a damp patch or a lender's letter, and by then it has usually been sitting against your timbers for years. These are the situations we get called to most often.
Mortgage lender refuses to lend on a foamed roof
We remove the foam with dry ice blasting, photograph every cleared bay and issue a written removal record your solicitor can send straight to the lender. Most Stafford sales we handle are back on track within a fortnight.
Hidden damp trapped against roof timbers
We blast the foam out, check the timber with a moisture meter and thermal imaging camera, and restore the airflow the roof needs. If we find rot that was already there, we photograph it and tell you before it spreads further.
Reduced loft ventilation and condensation
Removing the foam reopens the ventilation path. We clear the full roof space, confirm the airflow, and advise on replacement insulation that meets current standards without sealing the roof again.
Health hazards from isocyanates during removal
We work with respirators, an air scrubber and full containment, and dry ice blasting produces no chemical residue. The foam comes out bagged and the loft is left clean, with no dust left for you to breathe.
Pricing process
What dry ice blasting spray foam removal costs
900 - 1800 GBP for most residential lofts; commercial and large roof decks quoted on survey
Area of foam
Price scales with square metres of foam, not the size of the house. A single dormer bay is a very different job from a full roof deck, and we measure it properly at survey rather than estimating from the doorstep.
Open or closed cell
Closed cell spray foam is denser and bonds harder, so it takes longer to blast and fracture. Expect a full day for a typical closed cell loft, against four to six hours for open cell.
Access and roof height
Shallow terraced lofts need more hand-finishing, and taller or commercial roofs need PASMA access equipment. Both add time, and we price them in upfront rather than adding them later.
How much does dry ice blasting spray foam removal cost in Stafford?
Most residential jobs in Stafford run between 900 and 1800 pounds, with larger or commercial roofs going higher. The price depends on the square metres of foam, whether it is open or closed cell, and how easy the loft is to access. We survey first and give you a fixed written figure, so the number you agree is the number you pay.
Can you use dry ice blasting for spray foam removal in Stafford?
Yes, and it is our preferred method for most lofts. Dry ice pellets at around -78C freeze the foam until it fractures, then it lifts off the timber without water or chemicals. It works on both open cell and closed cell foam, though closed cell takes longer because it is denser. We confirm the right approach at survey.
Is dry ice spray foam removal available in Staffordshire?
We cover Stafford and the surrounding Staffordshire area, including Baswich, Wildwood, Rising Brook and the villages out towards Derrington. Travel within the town is included in your quote. If you are further out in the county, call 03335672543 and we will confirm coverage and timing before booking you in.
Will removing the foam damage my roof timbers?
No, that is the main reason we blast rather than scrape. Freezing the foam first means it releases from the rafter before we touch it, so the timber underneath stays whole. We finish with hand tools only where needed. If we find rot that was already there, we photograph it and tell you straight away.
Related services
Related Services
Spray Foam Removal near me
If you are searching for spray foam removal near me in Stafford, we cover the whole town and can usually survey within 48 hours. Dry ice blasting is the method we bring to most lofts, and it pairs with a full clearance and vacuum so nothing is left behind.
same day Spray Foam Removal
Same day spray foam removal suits smaller lofts and urgent sale deadlines. Where access is straightforward, we can survey in the morning and blast the foam the same afternoon. Call before 10am and we will tell you honestly whether your job fits a same-day slot.
24/7 Spray Foam Removal
Our 24/7 spray foam removal line stays open for emergencies, including water ingress through failed foam and commercial premises that cannot wait. Call 03335672543 at any hour and we will advise on containment and book the earliest practical slot for the blasting work.Ready when you are
Book dry ice blasting spray foam removal in Stafford
We survey, quote and clear failed spray foam, and we leave you with the photographs and paperwork a lender or buyer will ask for. Call 03335672543 and we will give you a fixed price for your loft.
Talk with the local team
Request dry ice blasting spray foam removal
Ring 0333 567 2543 any time, day or night, and you will speak to someone who knows Stafford roofs. For non-urgent jobs, email us a photo of the foam and we will come back with a survey slot, usually within one working day. We cover the whole of Stafford and Staffordshire.