
Specialist foam extraction for Staffordshire homes and lofts
Loft spray foam removal in Stafford done right
If spray foam is trapping damp in your roof, our loft spray foam removal in Stafford service clears it out properly. We handle open cell and closed cell foam, restore airflow, and get your loft back to a healthy, mortgageable state. Covering Stafford, Baswich, Wildwood and across Staffordshire, we survey first, quote upfront, and leave the timbers clean.
What's included
What our loft spray foam removal includes
Every loft spray foam removal in Stafford job includes the survey, the extraction, the clean-down and the paperwork. Replacement insulation and roof repairs are quoted separately if you need them, and we will tell you upfront before any extra work starts.
Full loft survey
We inspect foam type, depth and coverage, test timbers with a moisture meter, and check ventilation gaps. You get a written fixed price and a clear explanation of what we found.
Controlled foam extraction
Foam is cut with an oscillating multi-tool and industrial scraper, then blasted free with dry ice or sand blasting equipment. A spray foam removal vacuum and air scrubber keep dust out of your home.
Timber inspection and treatment
We check rafters and felt for rot, treat any early decay, and log thermal imaging and moisture readings. If we find something serious, we stop and talk to you before continuing.
Full clean-down
All foam debris, dust and blasting media are vacuumed out. Protective sheeting is removed and the loft is left tidy, with access clear and surfaces wiped down.
Documentation pack
You receive before and after photos, moisture readings and a written summary. This is the evidence surveyors, lenders and buyers ask for when a foamed roof has been cleared.
Responsible disposal
Removed foam is bagged, sealed and taken to a licensed waste facility. Where possible we separate material for recycling rather than sending it straight to landfill.
Service overview
What loft spray foam removal in Stafford involves
loft spray foam removal in Stafford is the controlled extraction of cured polyurethane foam from roof slopes, rafters and loft floors, followed by cleaning and ventilation checks. Foam is cut back with an oscillating multi-tool and industrial scraper, then blasted free with a dry ice blasting machine or sand blasting equipment. We capture debris with a spray foam removal vacuum and air scrubber, then check timbers with a moisture meter and thermal imaging camera before we sign the job off.
Most Stafford homes we see were foamed between the 1990s and 2010s under a grant scheme, often with Icynene or Lapolla product. The problem shows up years later: hidden damp, roof timber rot, and a mortgage lender refusal at survey. If you need loft insulation removal Stafford Staffordshire, we work across the town and surrounding villages, and we can usually book a loft spray foam removal in Stafford near me survey within a few days.
The service timeline
How our removal process runs
The process flexes to the condition, but these checkpoints keep decisions clear.
Survey and quote
We inspect the loft, check foam type and depth, and test timbers with a moisture meter. You get a written fixed price the same week, usually within 48 hours of the visit.
Loft protection
We lay protective sheeting over floors, joists and any stored items, seal the hatch, and set up negative air pressure with an air scrubber so dust stays in the loft, not in your house.
Foam extraction
Foam is cut with an oscillating multi-tool and industrial scraper, then blasted off with a dry ice blasting machine or sand blasting equipment. A two person crew clears a typical 30 square metre loft in one to two days.
Timber and vent checks
We inspect rafters and felt, treat any early rot, and confirm airflow gaps are clear. Thermal imaging camera readings and moisture meter results are logged for your records.
Clean down and handover
All debris is vacuumed out, surfaces wiped, and sheeting removed. We walk you through the finished loft, hand over photos, and explain what to watch for over the next 12 months.
Tools & methods
Tools and methods we use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Dry ice blasting machine
Freezes and lifts foam residue from rafters without wetting the timber. Ideal where damp is already a concern.
Sand blasting equipment
Strips stubborn foam from brickwork and hard surfaces. Media is contained and vacuumed out afterwards.
Spray foam removal vacuum
Captures foam fragments and dust at the cutting point, keeping the loft and your home clean.
Oscillating multi-tool
Cuts cured foam away from rafters and joists with minimal pressure on the timber.
Industrial scraper
Hand-clears foam from tight corners and around services where power tools will not fit.
Thermal imaging camera
Maps hidden damp and foam coverage before and after removal, so nothing is missed.
Moisture meter
Tests timber moisture content at the start and end of every job, with readings logged for your records.
Use cases
When to book loft spray foam removal
These examples show how the service framework adapts rather than forcing every call through one repair.

Damp loft in Wildwood dried out
A 1990s detached house in Wildwood had open cell foam sprayed between the rafters and a musty smell in the back bedroom. Thermal imaging showed two wet patches where foam was trapping moisture against the felt. → We cleared the foam in a single day, treated two rafters showing early surface mould, and reinstated airflow. Within four weeks the ceiling stains had dried and the smell had gone. Moisture readings settled at 13 to 15 percent.
Town centre terrace made mortgageable
A Victorian terrace near Stafford Town Centre had foam sprayed tight against original lath and felt. The surveyor noted structural damage from foam expansion and the lender would not proceed without removal and a report. → We removed the foam carefully by hand and with an oscillating multi-tool, checked every batten, and replaced two cracked tiles. The loft was cleaned, documented and signed off. The buyer's lender accepted the report and the mortgage completed.
Problems we solve
Problems our Stafford loft spray foam removal solves
Foam that was meant to save energy often causes bigger problems down the line. These are the issues we see most in Stafford lofts, and how we put them right.
Mortgage lender refuses to lend on a foamed roof
We remove the foam, inspect the timbers, and provide a documented pack with photos and moisture readings. Lenders and surveyors get the evidence they need, and the sale can move forward.
Hidden damp and condensation behind the foam
We clear the foam, restore the ventilation gap, and treat any damp timber we find. A thermal imaging camera and moisture meter confirm the loft is dry before we finish.
Roof timber rot from trapped moisture
Our crew inspects every rafter as the foam comes off. Early rot is treated on site, and we tell you straight away if a joiner or roofer needs to be involved.
Foam expansion has damaged the roof structure
We remove the foam carefully, check the felt and battens underneath, and report any structural damage with photos. Repairs can then be quoted separately and done properly.
Pricing process
What loft spray foam removal costs
£1,800 - £4,500 depending on scope
Loft size and shape
A standard 30 square metre semi-detached loft sits at the lower end. Larger detached lofts, L-shaped roofs and multiple slopes take longer and add to the price.
Foam type
Open cell foam cuts quickly and is cheaper to remove. Closed cell foam is dense and bonded hard to timber, so it takes roughly 20 to 30 percent longer and costs more.
Access and roof pitch
Easy hatch access and a steep pitch speed the job up. Low, cramped roof spaces in older Stafford terraces slow the crew down and add labour time.
How much does loft spray foam removal cost in Stafford?
Typical 2026 pricing in Stafford runs from £1,800 to £4,500 depending on loft size, foam type and access. A standard 30 square metre semi-detached loft with open cell foam usually lands around £2,400. Closed cell foam takes longer to cut and adds roughly 20 to 30 percent. We confirm the exact figure after a free survey.
Can you remove spray foam from my loft in Stafford?
Yes. We remove open cell and closed cell spray foam from lofts across Stafford and Staffordshire, including Icynene, Lapolla and BASF products. We cut the foam back with an oscillating multi-tool and industrial scraper, then blast residue free with a dry ice blasting machine. Most lofts are clear in one to two days.
Is loft insulation removal covered in Staffordshire?
There is no government grant for foam removal itself, but some Staffordshire homeowners offset the cost through energy efficiency schemes or by claiming against a mis-sold installation. We provide full documentation, including photos and moisture readings, that supports a complaint or insurance claim. We can also advise on replacement insulation options once the foam is out.
Will removing foam damage my roof?
No, when it is done properly. We cut and blast foam without levering at rafters, and we inspect timbers with a moisture meter before and after. If we find rot or failed felt, we tell you before we carry on. In most Stafford lofts the structure is sound and the roof is left cleaner and better ventilated than before.
Ready when you are
Book your loft spray foam removal in Stafford
One call gets you a free loft survey, a fixed price, and a clear plan for removing the foam. We are Stafford-based, fully insured, and we leave the loft clean. Call 0333 567 2543 today.

Talk with the local team
Request loft spray foam removal
Ring 0333 567 2543 any time, day or night, and you will speak to someone who knows Stafford roofs. For non-urgent jobs, email us a photo of the foam and we will come back with a survey slot, usually within one working day. We cover the whole of Stafford and Staffordshire.



