Certified spray foam extraction for Staffordshire homes and businesses
Thermal spray foam removal in Stafford done right, first time
If spray foam insulation is trapping damp, blocking your loft ventilation, or stopping a mortgage lender from releasing funds, our thermal spray foam removal in Stafford fixes it. We cover Stafford and the whole of Staffordshire, extracting open cell and closed cell foam from lofts, roofs and cavity walls. Our team uses dry ice blasting and vacuum extraction to clear foam without wrecking your timbers or plasterboard. Same-day quotes, honest pricing, and a clean site when we leave.
Live phone supportUpfront optionsBacked workmanship
What's included
What our thermal spray foam removal includes
Every removal we quote includes the survey, the extraction, the clean-down and the paperwork. There are no hidden extras for waste disposal or access equipment on a standard Stafford loft. Here is exactly what you get.
Free survey and fixed quote
We visit, inspect the foam with a thermal imaging camera and moisture meter, and check the timbers for rot. You get a written fixed price the same day, usually within 2 hours. No charge, no obligation, no pressure to book on the spot.
Full foam extraction
We remove all accessible spray foam from the loft, roof deck or cavity, using dry ice blasting, an oscillating multi-tool, industrial scrapers and a spray foam removal vacuum. Debris is bagged and removed under a licensed waste transfer note.
Timber inspection and treatment
Every rafter and purlin is checked for rot and treated where needed. We photograph the timbers before and after for your records. This is the documentation mortgage lenders and surveyors ask for when they review a spray foam property.
Ventilation restoration
We clear blocked vents, check the felt and existing insulation, and confirm air is moving through the roof space again. Restoring ventilation is what stops the damp returning, and it is included as standard on every job we do.
Clean-down and waste removal
We hoover the work area, remove all waste through a licensed carrier, and leave the space tidy. You get the photo record, the waste transfer note and a 5-year workmanship warranty on the removal. Most homes are back to normal the same day.
Service overview
What thermal spray foam removal in Stafford actually involves
Thermal spray foam removal in Stafford is the controlled extraction of cured polyurethane foam from lofts, roof decks, cavity walls and floor voids. Spray foam is a two-part chemical mix of isocyanate and polyol resin that cures hard, and once it is in, it does not come out with a scraper and a bit of patience. We use a combination of dry ice blasting, an oscillating multi-tool, industrial scrapers and a spray foam removal vacuum to break the bond and lift the foam off timber, tiles and brickwork. Every job starts with a thermal imaging camera and moisture meter survey so we know exactly what is wet and what is sound before we touch anything.
Most Stafford homeowners call us for one of three reasons: a mortgage lender has refused to lend on a property with spray foam in the roof, the loft has started to smell damp, or a surveyor has flagged reduced loft ventilation. In Staffordshire, the combination of older brick-built terraces and our damp, mild winters makes trapped moisture a real problem. If you have been searching for thermal spray foam removal in Stafford near me, we cover the whole town, from Baswich to Wildwood, and we can usually survey within 48 hours of your call.
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.
The service timeline
How our spray foam removal process works
The process flexes to the condition, but these checkpoints keep decisions clear.
Survey and quote
We visit, inspect the foam with a thermal imaging camera and moisture meter, and check the timbers for rot. You get a written fixed price the same day, usually within 2 hours of the survey. No charge for the survey, no pressure to book.
Site protection
On day one we lay protective sheeting across floors, stairs and doorways, and set up an air scrubber. We isolate the loft space and confirm the extraction route. This stage takes 1 to 2 hours and keeps the rest of your house clean.
Foam extraction
We break the foam down using dry ice blasting, an oscillating multi-tool and industrial scrapers, then vacuum the debris into sealed bags. A typical Stafford loft takes 1 to 2 days. Larger roof decks and cavity wall foam can run to 3 or 4 days.
Timber and ventilation check
Once the foam is gone we inspect every rafter and purlin, treat any early rot, and confirm the roof space is ventilating properly. We photograph the timbers for your records. This is the stage that satisfies mortgage lenders and surveyors.
Clean-down and handover
We remove all waste under a licensed carrier note, hoover the area, and walk you through the finished job. You get the photo record, the waste transfer note and a 5-year workmanship warranty on the removal. Most customers are back to normal the same day.
Tools & methods
Tools and methods we use for foam removal
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Dry ice blasting machine
Lifts cured foam off timber without abrasive damage. Dry ice pellets sublimate on contact, so there is no secondary waste to clean up. Our preferred method for delicate rafters and roof decks.
Spray foam removal vacuum
Captures foam debris and dust at the point of extraction. Keeps the work area clean and stops fine particles spreading through the house. Used alongside hand tools on every job.
Oscillating multi-tool
Cuts through closed cell foam and breaks the bond at the edges without gouging the timber beneath. Ideal for trimming foam away from rafters, battens and wall plates.
Thermal imaging camera
Shows where moisture is trapped behind the foam before we start. We use it at survey stage and again at handover to prove the roof space has dried out properly.
Moisture meter
Takes readings from timbers and plasterboard to confirm what is wet and what is sound. Readings are logged before and after so you can see the difference in black and white.
Air scrubber
Runs throughout the job to filter dust and airborne particles from the work area. Essential when removing foam that contains isocyanates, and it keeps the rest of your home clean.
Industrial scraper and respirator kit
Hand tools for the final passes where machines cannot reach, plus full face and respiratory protection for the crew. Cured foam dust is not something to breathe in, so we do not cut corners on PPE.
Use cases
When Stafford customers call us for foam removal
These examples show how the service framework adapts rather than forcing every call through one repair.
Damp smell cleared in Stafford Town Centre
A Victorian terrace had closed cell foam in the loft and a persistent damp smell in the back bedroom. The landlord had been quoted for a full re-roof by another firm, which was not necessary. The timbers were wet but not yet rotten. → We removed the foam with dry ice blasting over three days, treated two timbers, and restored airflow. Moisture readings dropped from 28% to 14% within a fortnight. The re-roof was avoided, saving the landlord thousands.
Condensation stopped in Wildwood
A modern timber-frame house in Wildwood had open cell foam blocking the loft vents. Condensation was forming on the felt, and the mineral wool insulation underneath was soaked. The homeowner was worried about mould spreading into the ceiling. → We removed the foam in a single day, cleared the blocked vents, and replaced the wet insulation. A smoke test confirmed airflow was back. The condensation stopped within a week, and the loft dried out fully over the following month.
Problems we solve
Problems our Stafford foam removal solves
Spray foam causes a predictable set of problems in Staffordshire homes. Here are the ones we see most often, and what happens if they are left alone.
Mortgage lender refuses to lend on a spray foam property
We remove the foam, document every rafter with photos, and provide the paperwork your surveyor needs. Most Stafford cases are resolved within 5 to 10 working days, and we can prioritise if you have a deadline.
Hidden damp and roof timber rot
Our thermal imaging camera and moisture meter find the wet sections before they spread. We remove the foam, treat any early rot, and restore ventilation so the roof can dry out properly.
Reduced loft ventilation and condensation
Once the foam is out, we clear the vents and confirm air is moving again. We check the felt and existing insulation at the same time, and replace anything that has been soaked.
Structural damage from foam expansion
We remove the foam carefully with hand tools and dry ice blasting rather than force, so we do not add to the damage. If timbers are bowed, we tell you straight and quote any remedial work separately.
Pricing process
What thermal spray foam removal costs in Stafford
1,800 - 4,500 depending on scope
Foam type
Open cell foam is softer and quicker to remove, so it sits at the lower end of the range. Closed cell foam cures hard and bonds tightly to timber, which takes longer and pushes the price up. We identify the type at survey stage.
Roof access and pitch
A steep Victorian roof with a tight loft hatch takes longer than a modern trussed roof with good access. Where we need PASMA-trained access equipment, that is factored into the quote, not added on later.
Area covered
We price per square metre for larger roof decks and warehouse jobs. A single loft is usually quoted as a fixed job price. Cavity wall foam is priced separately because it is a slower, more involved extraction.
How much does thermal spray foam removal cost in Stafford?
Most Stafford loft removals cost between 1,800 and 4,500 in 2026, depending on foam type, roof access and how much timber needs treating. A simple open cell loft in a modern house sits at the lower end. Closed cell foam on a steep Victorian roof, or cavity wall foam, pushes the price up. We give you a fixed written price after a free survey, so there is no guesswork.
Can you remove thermal spray foam in Stafford?
Yes. We remove open cell and closed cell spray foam from lofts, roof decks, cavity walls and floor voids across Stafford and Staffordshire. Our team uses dry ice blasting, an oscillating multi-tool and a spray foam removal vacuum to lift the foam without damaging timbers. We have completed over 400 removals since 2022, including Icynene, Lapolla and BASF foam.
Is thermal foam extraction available in Staffordshire?
Yes, thermal foam extraction Stafford Staffordshire coverage includes the whole county, not just the town. We work in Stafford, Stone, Cannock, Rugeley, Eccleshall and the surrounding villages. Travel is included in the quoted price for anywhere within 20 miles of Stafford. For larger commercial roofs further out, call us and we will confirm the logistics before you book.
Will removing spray foam damage my roof?
No, when it is done properly. We use dry ice blasting and hand tools rather than sand blasting equipment on delicate timbers, and we inspect every rafter as we go. If we find rot, we treat it before we finish. The bigger risk is leaving the foam in, which traps moisture and rots the roof from the inside. We photograph the timbers before and after so you can see the condition for yourself.
Related services
Related Services
Spray Foam Removal near me
If you are searching for spray foam removal near me in Stafford, we cover the whole town and surrounding villages. Same team, same kit, same fixed pricing whether you are in Baswich or Burton Manor. Call us and we will survey within 48 hours.
same day Spray Foam Removal
For urgent cases, such as a mortgage deadline or a leak that cannot wait, we offer same day spray foam removal where the job allows. Call before 10am and we will do our best to get a crew to you that afternoon. Survey and quote are still free.
24/7 Spray Foam Removal
Our phone line is open 24/7 for emergencies, including storm damage where foam has come loose or a leak is spreading. We will talk you through making the area safe and book the earliest available slot. Most emergency call-outs are attended within 24 hours.Ready when you are
Book your thermal spray foam removal in Stafford today
Free survey, fixed written price, and a 5-year workmanship warranty on every removal. Call our Stafford team on 0333 567 2543 and we will book your survey within 48 hours. If a mortgage deadline is looming, tell us and we will prioritise your job.
Talk with the local team
Request thermal spray foam removal
Ring 0333 567 2543 any time, day or night, and you will speak to someone who knows Stafford roofs. For non-urgent jobs, email us a photo of the foam and we will come back with a survey slot, usually within one working day. We cover the whole of Stafford and Staffordshire.